Spamassassin 3rd-party rules
Spamassassin 3rd-party rules
As the SARE rules and the rules_du_jour are no longer available for SpamAssassin here is a mod to add additional rules for use with SpamAssassin.
Da SARE ebenso wie die uralten Rules_du_Jour nicht mehr verfügbar sind hier ein Mod, der zusätzliche Regeln für SpamAssassin zur Verfügung stellt.
For all users there will be the
Für alle Benutzer sind das
MalwarePatrol ruleset
MIME validation ruleset
For german users only there will be the
Ausschließlich für Benutzer mit deutschspachiger Installation gibt es noch das
zmi ruleset
In addition there are some changes to the GUI, and logging and update mailing is now available.
Zusätzlich wurde noch die AntiSpam und die Status GUI geändert; außerdem steht ein Log und eine Update Mail zur Verfügung.
For the mailing the "error" setting on the mail GUI will take effect, so if set you will get only mails when errors occur during update.
Für die Update Mail greift die Einstellung "error" auf der Email GUI, so daß due nur Mails bei Updatefehlern bekommst, wenn diese Option gesetzt ist.
Download:
Package: Ruleset mod 0.03.0
ChecksumFile: CHECKSUM
Use on your own risk!
Benutzen auf eigene Verantwortung!
Severus
Da SARE ebenso wie die uralten Rules_du_Jour nicht mehr verfügbar sind hier ein Mod, der zusätzliche Regeln für SpamAssassin zur Verfügung stellt.
For all users there will be the
Für alle Benutzer sind das
MalwarePatrol ruleset
MIME validation ruleset
For german users only there will be the
Ausschließlich für Benutzer mit deutschspachiger Installation gibt es noch das
zmi ruleset
In addition there are some changes to the GUI, and logging and update mailing is now available.
Zusätzlich wurde noch die AntiSpam und die Status GUI geändert; außerdem steht ein Log und eine Update Mail zur Verfügung.
For the mailing the "error" setting on the mail GUI will take effect, so if set you will get only mails when errors occur during update.
Für die Update Mail greift die Einstellung "error" auf der Email GUI, so daß due nur Mails bei Updatefehlern bekommst, wenn diese Option gesetzt ist.
Download:
Package: Ruleset mod 0.03.0
ChecksumFile: CHECKSUM
Use on your own risk!
Benutzen auf eigene Verantwortung!
Severus
-
- Posts: 17
- Joined: 10 Jul 2010 18:50
Re: Spamassassin 3rd-party rules
Hello,
Environment is IPCop 1.4.21 / copfilter 0.85.3beta4 /3rd_party 0.60.5
Here are what I've had on installing new release for Spamassassin :
Installing spamassassin rulesets 0.03.0 ...
./install: line 88: [: /var/log/copfilter/default/opt/mail-spamassassin/etc/mail /spamassassin/local.cf: binary operator expected
local.cf is actual. No modifying necessary.
GUI and language files already backed up. No further backup necessary.
creating log file and symlink
copy new rules
copy new check-update script for rulesets
setting new owner.group for spamassassin files and directories
copy new copfilter_testlog.cgi, copfilter_antispam.cgi, language files and set saupdate.log for logrotating...
cp: cannot stat `/tmp/copfilter_spamassassin_rulesets_0.03.0/guifiles/.85.3': No such file or directory
cp: cannot stat `/tmp/copfilter_spamassassin_rulesets_0.03.0/guifiles/.85.3': No such file or directory
cp: cannot stat `/tmp/copfilter_spamassassin_rulesets_0.03.0/guifiles/.85.3': No such file or directory
modifying /etc/logrotate.conf by adding new settings...done
restarting spamassassin if enabled
spamassassin ruleset 0.03.0 installation finished
Regards,
Christophe
Edit:
On my production firewall, I've noticed that SA Rules have been updated. Does it means that "Spamassassin 3rd-party rules" addon is included on last version of "3rd party 0.60.6" ?
Compléments et améliorations de Copfilter
SA Rules Paramètrage des règles AntiSpam fcron 0.03.0 ON CRON JOB (PID 445)
ClamAV 3rd-party-mod ClamAV signatures antivirales tierces fcron 0.60.6 ON CRON JOB (PID 445)
Privoxy mod Règles tierces pour Privoxy fcron 1.1.4 ON CRON JOB (PID 445)
Environment is IPCop 1.4.21 / copfilter 0.85.3beta4 /3rd_party 0.60.5
Here are what I've had on installing new release for Spamassassin :
Installing spamassassin rulesets 0.03.0 ...
./install: line 88: [: /var/log/copfilter/default/opt/mail-spamassassin/etc/mail /spamassassin/local.cf: binary operator expected
local.cf is actual. No modifying necessary.
GUI and language files already backed up. No further backup necessary.
creating log file and symlink
copy new rules
copy new check-update script for rulesets
setting new owner.group for spamassassin files and directories
copy new copfilter_testlog.cgi, copfilter_antispam.cgi, language files and set saupdate.log for logrotating...
cp: cannot stat `/tmp/copfilter_spamassassin_rulesets_0.03.0/guifiles/.85.3': No such file or directory
cp: cannot stat `/tmp/copfilter_spamassassin_rulesets_0.03.0/guifiles/.85.3': No such file or directory
cp: cannot stat `/tmp/copfilter_spamassassin_rulesets_0.03.0/guifiles/.85.3': No such file or directory
modifying /etc/logrotate.conf by adding new settings...done
restarting spamassassin if enabled
spamassassin ruleset 0.03.0 installation finished
Regards,
Christophe
Edit:
On my production firewall, I've noticed that SA Rules have been updated. Does it means that "Spamassassin 3rd-party rules" addon is included on last version of "3rd party 0.60.6" ?
Compléments et améliorations de Copfilter
SA Rules Paramètrage des règles AntiSpam fcron 0.03.0 ON CRON JOB (PID 445)
ClamAV 3rd-party-mod ClamAV signatures antivirales tierces fcron 0.60.6 ON CRON JOB (PID 445)
Privoxy mod Règles tierces pour Privoxy fcron 1.1.4 ON CRON JOB (PID 445)
Re: Spamassassin 3rd-party rules
Hi CopfilterLover,
This is proved by the three lines, too. There must be three entries in the FILES_GUI variable as planned. Otherwise you wouldn't get three lines.
But I can't find the culprit yet.
I'll look for this.
Severus
No. There are only the necessary GUI files in this mod, so it will be displayed correctly.CopfilterLover wrote:On my production firewall, I've noticed that SA Rules have been updated. Does it means that "Spamassassin 3rd-party rules" addon is included on last version of "3rd party 0.60.6" ?
Compléments et améliorations de Copfilter
SA Rules Paramètrage des règles AntiSpam fcron 0.03.0 ON CRON JOB (PID 445)
ClamAV 3rd-party-mod ClamAV signatures antivirales tierces fcron 0.60.6 ON CRON JOB (PID 445)
Privoxy mod Règles tierces pour Privoxy fcron 1.1.4 ON CRON JOB (PID 445)
I checked the install file but couldn't find any bug.CopfilterLover wrote:cp: cannot stat `/tmp/copfilter_spamassassin_rulesets_0.03.0/guifiles/.85.3': No such file or directory
cp: cannot stat `/tmp/copfilter_spamassassin_rulesets_0.03.0/guifiles/.85.3': No such file or directory
cp: cannot stat `/tmp/copfilter_spamassassin_rulesets_0.03.0/guifiles/.85.3': No such file or directory
This is proved by the three lines, too. There must be three entries in the FILES_GUI variable as planned. Otherwise you wouldn't get three lines.
But I can't find the culprit yet.
I'll look for this.
Severus
-
- Posts: 846
- Joined: 13 May 2010 22:37
- Location: FRANCE
Re: Spamassassin 3rd-party rules
Hi CopfilterLover,
Have a try with replacing line ~165 in the install file :
with
Regards.
Shelby
('@Severus:
)
Have a try with replacing line ~165 in the install file :
Code: Select all
cp -pfT ${akt_dir}/guifiles/$FILE_0.85.3 /home/httpd/cgi-bin/$FILE
Code: Select all
cp -pfT ${akt_dir}/guifiles/${FILE}_0.85.3 /home/httpd/cgi-bin/$FILE
Shelby
('@Severus:

-
- Posts: 17
- Joined: 10 Jul 2010 18:50
Re: Spamassassin 3rd-party rules
Thank you for debug, it works now, display is OK with 0.03.0 running
I've to comment the following to bypass, in order to "force" installation due to first bad parameters.
# else
# echo -e "\033[1;31mno newer version. Exiting...\033[1;0m"
# exit 1
Thank you both for your good work
Regards,
Christophe
I've to comment the following to bypass, in order to "force" installation due to first bad parameters.
# else
# echo -e "\033[1;31mno newer version. Exiting...\033[1;0m"
# exit 1
Thank you both for your good work
Regards,
Christophe
Re: Spamassassin 3rd-party rules
Where did the manual Bayes Training button go to? I manually train mine and now the button is gone.
-
- Posts: 846
- Joined: 13 May 2010 22:37
- Location: FRANCE
Re: Spamassassin 3rd-party rules
Hi ljrO,
Wich version of Copfilter are you using ? Wich mods ?
Regards.
Shelby.
Wich version of Copfilter are you using ? Wich mods ?
Regards.
Shelby.
Re: Spamassassin 3rd-party rules
copfilter: 2.0.91beta3
I'll try the beta4. I thought I was running the most recent.
I'll try the beta4. I thought I was running the most recent.
Re: Spamassassin 3rd-party rules
I had installed the Spamassassin 3rd-party rules 0.30.0 without installing the 0.20.0 version and the button disappeared. I was looking for the cause of a sudden dccifd error and decided an upgrade to the rules might fix the issue.
It didn't, but installing beta4 fixed it.
After reading what the 3rd party rules in 0.20.0 was suppose to be for (mostly to allow AVG and avast) I decided I didn't need it.
It didn't, but installing beta4 fixed it.
After reading what the 3rd party rules in 0.20.0 was suppose to be for (mostly to allow AVG and avast) I decided I didn't need it.
-
- Posts: 846
- Joined: 13 May 2010 22:37
- Location: FRANCE
Re: Spamassassin 3rd-party rules
Hi,
Regards.
ShelbyGT500
Glad to hear!ljr0 wrote:installing beta4 fixed it.

Note Karesmakro is working on a new version 2.0.91beta5.Stay tuned ....ljr0 wrote:I'll try the beta4. I thought I was running the most recent.
Regards.
ShelbyGT500