User Tools

Site Tools


en:tips_and_tricks

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
en:tips_and_tricks [2013/10/01 20:52]
fischerm [Description]
en:tips_and_tricks [2016/12/04 13:01] (current)
fischerm
Line 1: Line 1:
 <style background-lwhite center> <style background-lwhite center>
-<style background-lblue box-dblue float-left ​s30><​sub>​{{:​images:​flag_en_border.png?​nolink&​40}}</​sub>​ <sup>[[:​en:​bugfixes|Bugfixes]]</sup></​style>​ +<style background-lblue box-dblue float-left>​{{:​images:​flag_en_border.png?​nolink&​40}} ​[size=11][[:​en:​bugfixes|Bugfixes]][/size]</​style>​ 
-<style background-lblue box-dblue float-right ​s30><​sub>​{{:​images:​flag_en_border.png?​nolink&​40|}}</​sub>​ <sup>[[:​en:​howtos|HowTos]]</sup></​style>​ +<style background-lblue box-dblue float-right>​{{:​images:​flag_en_border.png?​nolink&​40|}} ​[size=11][[:​en:​howtos|HowTos]][/size]</​style>​ 
-[[http://​www.copfilter.org|{{:​images:​copfilter-logo.png?​150|Copfilter-Homepage}}]]+[[http://​www.copfilter.org|{{:​images:​copfilter-logo.png?​130|Copfilter-Homepage}}]]
 <style background-lwhite>​[[:​en:​sitemap#​sitemap|Sitemap]]</​style>​ <style background-lwhite>​[[:​en:​sitemap#​sitemap|Sitemap]]</​style>​
 </​style>​ </​style>​
  
----- +{{ :​images:​line.png?​620x3&​nolink |}}
----- +
-\\+
 \\ \\
 +
 ====== Part 6 - Tips and Tricks ====== ====== Part 6 - Tips and Tricks ======
  
Line 16: Line 15:
   * Ok, now it's time for a small change to make things a bit more relaxed:   * Ok, now it's time for a small change to make things a bit more relaxed:
  
-  * ** The main purpose of this part is to collect and describe several //__Tips and Tricks__// regarding - __**not only**__ - the Copfilter-Addon but IPCop in general**!+  * ** The main purpose of this part is to collect and describe several //__Tips and Tricks__// regarding - __**not only**__ - the Copfilter-Addon but IPCop in general**.
  
-  * I won't repeat the usual __safety precautions and notes__ from [[en:​modifications_and_extensions|Part 4]] at this point, but of course they'​re still have validity!+  * I won't repeat the usual __safety precautions and notes__ from [[:en:​modifications_and_extensions|Part 4]] at this point, but of course they'​re still have validity!
  
----- 
-\\ 
 [size=15]**[color=red]Please note:​[/​color]**[/​size]\\ [size=15]**[color=red]Please note:​[/​color]**[/​size]\\
  
Line 30: Line 27:
   * **[color=red]What'​s that thing called RESTORE?​[/​color]**   * **[color=red]What'​s that thing called RESTORE?​[/​color]**
   * **[color=red]Who or what is a "​Vi",​ where does it live, what does it eat ..?​[/​color]** :-)\\ \\ Quick-Reference-Card for '​Vi':​ [url]http://​st23.org/​misc/​sysadmin//​downloads/​referenzkarte-vi.pdf[/​url]   * **[color=red]Who or what is a "​Vi",​ where does it live, what does it eat ..?​[/​color]** :-)\\ \\ Quick-Reference-Card for '​Vi':​ [url]http://​st23.org/​misc/​sysadmin//​downloads/​referenzkarte-vi.pdf[/​url]
-\\ + 
----- +{{ :​images:​line.png?​620x3&​nolink |}}
----- +
-\\+
  
 {{ :​images:​copfilter_v1_logo1.png?​nolink&​90|V1-Logo}} {{ :​images:​copfilter_v1_logo1.png?​nolink&​90|V1-Logo}}
Line 40: Line 35:
 **See:** [url]http://​www.ipcop-forum.de/​forum/​viewtopic.php?​t=11690[/​url]\\ **See:** [url]http://​www.ipcop-forum.de/​forum/​viewtopic.php?​t=11690[/​url]\\
  
-<note>+<WRAP center round info 60%> 
 [size=15][color=red]**__IPCop 1.4.x ONLY:​__**[/​color][/​size] [size=15][color=red]**__IPCop 1.4.x ONLY:​__**[/​color][/​size]
  
 :!: In IPCop 1.9.x/2.x [color=red]**(V2)**[/​color] this feature is already installed. :!: In IPCop 1.9.x/2.x [color=red]**(V2)**[/​color] this feature is already installed.
-</​note>​ 
  
-----+</​WRAP>​
  
 ==== Description ==== ==== Description ====
Line 66: Line 61:
 fi</​code>​ fi</​code>​
  
-After a reboot (or manually executing **/​etc/​rc.d/​rc.local**) IPCop will now perform a clean "​shutdown"​ and power off the machine by simply pressing a button.\\+After a reboot (or manually executing **/​etc/​rc.d/​rc.local**) IPCop will now perform a clean "​shutdown"​ and power off the machine by simply pressing a button.
 \\ \\
  
-===== ===== +{{ :images:line.png?nolink |}}
-[[http://​www.copfilter.org/​wiki/​doku.php?​id=en:​tips_and_tricks#​dokuwiki__top|{{:images:backtotop.png}}]] +
- +
-===== ===== +
----- +
----- +
-\\+
  
 {{ :​images:​copfilter_v1_logo1.png?​nolink&​90|V1-Logo}} {{ :​images:​copfilter_v1_logo1.png?​nolink&​90|V1-Logo}}
Line 81: Line 70:
  
 **See:** [url]http://​mh-lantech.css-hamburg.de/​ipcop/​e107_plugins/​forum/​forum_viewtopic.php?​4714[/​url]\\ **See:** [url]http://​mh-lantech.css-hamburg.de/​ipcop/​e107_plugins/​forum/​forum_viewtopic.php?​4714[/​url]\\
- 
----- 
  
 ==== Description ==== ==== Description ====
Line 110: Line 97:
 //Save the file ... then refresh any IPCOP cgi page ...//\\ //Save the file ... then refresh any IPCOP cgi page ...//\\
 //... the IPCOP menu should now be a little easier to see - n' navigate."//​\\ //... the IPCOP menu should now be a little easier to see - n' navigate."//​\\
- 
----- 
  
 ==== Screenshot ==== ==== Screenshot ====
  
 {{en:​images:​menue_tuning.png?​nolink|Menu-Tuning}} {{en:​images:​menue_tuning.png?​nolink|Menu-Tuning}}
-\\ 
-\\ 
  
-===== ===== +{{ :images:line.png?nolink |}}
-[[http://​www.copfilter.org/​wiki/​doku.php?​id=en:​tips_and_tricks#​dokuwiki__top|{{:images:backtotop.png}}]] +
- +
-===== ===== +
----- +
----- +
-\\+
  
 ===== 3. Options in '​setup_util'​ ===== ===== 3. Options in '​setup_util'​ =====
Line 162: Line 139:
 http://​www.copfilter.org</​code>​ http://​www.copfilter.org</​code>​
  
-<note tip>'​setup_util'​ is particularly important during an [[en:​update-installation#​installation|update installation]],​ or the installation of an additional virus scanner, such as\\ [[en:​component_updates#​f-prot|F-Prot]].</​note>​+<note tip>'​setup_util'​ is particularly important during an [[:en:​update-installation#​installation|update installation]],​ or the installation of an additional virus scanner, such as\\ [[:en:​component_updates#​f-prot|F-Prot]].</​note>​
  
-===== ===== +{{ :images:line.png?nolink |}}
-[[http://​www.copfilter.org/​wiki/​doku.php?​id=en:​tips_and_tricks#​dokuwiki__top|{{:images:backtotop.png}}]]+
  
-===== ===== +===== 4. 'monit' does not start due to incorrect file permissions of '​monit.rc'​ =====
----- +
----- +
-\\ +
- +
-===== 4. 'Monit' does not start due to incorrect file permissions of '​monit.rc'​ =====+
  
 **See also:**\\ **See also:**\\
Line 178: Line 149:
 and\\ and\\
 [url]http://​www.copfilter.org/​forum/​viewtopic.php?​f=3&​t=228[/​url] [url]http://​www.copfilter.org/​forum/​viewtopic.php?​f=3&​t=228[/​url]
- 
----- 
  
 ==== Problem ==== ==== Problem ====
  
-In rare cases '​monit'​ won't start anymore.\\ +In rare cases '​monit'​ won't start anymore.
  
-Nothing can be found in the logs - output is quite simple:\\+Nothing can be found in the logs - output is quite simple:
 <​code>​starting monit <BR> <​code>​starting monit <BR>
 waiting 3 second(s) <BR> waiting 3 second(s) <BR>
 monit is not running <​BR></​code>​ monit is not running <​BR></​code>​
  
-Even\\+Even
 <​code>/​var/​log/​copfilter/​default/​opt/​monit/​etc/​init.d/​copfilter_monit debug</​code>​ <​code>/​var/​log/​copfilter/​default/​opt/​monit/​etc/​init.d/​copfilter_monit debug</​code>​
 only provides only provides
Line 198: Line 167:
 /​var/​log/​copfilter/​default/​opt/​monit/​etc/​init.d/​copfilter_monit:​ line 279: debug: command not found /​var/​log/​copfilter/​default/​opt/​monit/​etc/​init.d/​copfilter_monit:​ line 279: debug: command not found
 monit is not running</​code>​ monit is not running</​code>​
- 
----- 
  
 ==== Cause ==== ==== Cause ====
  
 Wrong file permissions of '/​var/​log/​copfilter/​default/​opt/​monit/​etc/​**monit.rc**'​\\ Wrong file permissions of '/​var/​log/​copfilter/​default/​opt/​monit/​etc/​**monit.rc**'​\\
- 
----- 
  
 ==== Solution ==== ==== Solution ====
  
-Log in on the console as '​root'​ using a suitable client (ssh, [[en:​tools#​putty|PuTTY]],​ ...) and initiate the following commands:\\ +Log in on the console as '​root'​ using a suitable client (ssh, [[:en:​tools#​putty|PuTTY]],​ ...) and initiate the following commands:
- +
-----+
  
 <​code>​cd /​var/​log/​copfilter/​default/​opt/​monit/​etc</​code>​ <​code>​cd /​var/​log/​copfilter/​default/​opt/​monit/​etc</​code>​
Line 218: Line 181:
  
 Problem should be solved... Problem should be solved...
-\\ 
-\\ 
  
-===== ===== +{{ :images:line.png?nolink |}}
-[[http://​www.copfilter.org/​wiki/​doku.php?​id=en:​tips_and_tricks#​dokuwiki__top|{{:images:backtotop.png}}]] +
- +
-===== ===== +
----- +
----- +
-\\+
  
 ===== 5. Turn off E-Mail notifications ===== ===== 5. Turn off E-Mail notifications =====
  
 **Initiated by:** [url]http://​www.copfilter.org/​forum/​viewtopic.php?​p=621#​p621[/​url] **Initiated by:** [url]http://​www.copfilter.org/​forum/​viewtopic.php?​p=621#​p621[/​url]
- 
----- 
  
 <​note>​ <​note>​
 [size=15]**[color=red]Please note:​[/​color]**[/​size] [size=15]**[color=red]Please note:​[/​color]**[/​size]
-  * This mod is already included in [[en:​modifications_and_extensions#​rd_party_signatures|3rd Party Signatures]] since version **0.55.0**. Notification is switched ON/OFF via [[en:​modifications_and_extensions#​screenshots|Email GUI]].+  * This mod is already included in [[:en:​modifications_and_extensions#​rd_party_signatures|3rd Party Signatures]] since version **0.55.0**. Notification is switched ON/OFF via [[:en:​modifications_and_extensions#​screenshots|Email GUI]].
   * **Don'​t use** this mod if you use a newer version!   * **Don'​t use** this mod if you use a newer version!
 </​note>​ </​note>​
- 
----- 
  
 ==== Description ==== ==== Description ====
Line 255: Line 206:
 //d = disable email notifying ​    e = enable email notifying// //d = disable email notifying ​    e = enable email notifying//
 \\ \\
- 
----- 
  
 ==== Download ==== ==== Download ====
Line 264: Line 213:
 |[[http://​www.it-connect-unix.de/​jdownloads/​general/​no_upd_mail_notif.tar.gz|no_upd_mail_notif.tar.gz]]| ​ 2 KB  | |[[http://​www.it-connect-unix.de/​jdownloads/​general/​no_upd_mail_notif.tar.gz|no_upd_mail_notif.tar.gz]]| ​ 2 KB  |
 |**MD5SUM:​**|DE4A2B81D151391BE70F5C60CA5B7E1E| |**MD5SUM:​**|DE4A2B81D151391BE70F5C60CA5B7E1E|
- 
----- 
  
 ==== Installation ==== ==== Installation ====
  
-**Installation proceeds as described in [[en:​copfilter_-_installation_and_update#​the_installation_of_the_software_archives|The installation of the software archives]]:​**\\ +**Installation proceeds as described in [[:en:​copfilter_-_installation_and_update#​the_installation_of_the_software_archives|The installation of the software archives]]:​**\\ 
-  - [[en:​copfilter_-_installation_and_update#​login|Login]] +  - [[:en:​copfilter_-_installation_and_update#​login|Login]] 
-  - [[en:​copfilter_-_installation_and_update#​download|Download]] +  - [[:en:​copfilter_-_installation_and_update#​download|Download]] 
-  - [[en:​copfilter_-_installation_and_update#​check_md5_sum|Check MD5 sum]] +  - [[:en:​copfilter_-_installation_and_update#​check_md5_sum|Check MD5 sum]] 
-  - [[en:​copfilter_-_installation_and_update#​extract_the_installation_archive|Extract the installation archive]] +  - [[:en:​copfilter_-_installation_and_update#​extract_the_installation_archive|Extract the installation archive]] 
-  - [[en:​copfilter_-_installation_and_update#​change_to_installation_directory|Change to installation directory]] +  - [[:en:​copfilter_-_installation_and_update#​change_to_installation_directory|Change to installation directory]] 
-  - [[en:​copfilter_-_installation_and_update#​starting_the_installation|Starting the installation]] +  - [[:en:​copfilter_-_installation_and_update#​starting_the_installation|Starting the installation]] 
-  - [[en:​copfilter_-_installation_and_update#​installation_ok|Installation ok?]] +  - [[:en:​copfilter_-_installation_and_update#​installation_ok|Installation ok?]] 
-  - [[en:​copfilter_-_installation_and_update#​deleting_the_installation_directories_optional|Deleting the installation directories (optional)]] +  - [[:en:​copfilter_-_installation_and_update#​deleting_the_installation_directories_optional|Deleting the installation directories (optional)]]
-\\+
  
-===== ===== +{{ :images:line.png?nolink |}}
-[[http://​www.copfilter.org/​wiki/​doku.php?​id=en:​tips_and_tricks#​dokuwiki__top|{{:images:backtotop.png}}]] +
- +
-===== ===== +
----- +
----- +
-\\+
  
 ===== 6. '​crontab'​ prevents Copfilter-Installation ===== ===== 6. '​crontab'​ prevents Copfilter-Installation =====
  
 **Initiated by:** [url]http://​www.copfilter.org/​forum/​viewtopic.php?​p=776#​p776[/​url] **Initiated by:** [url]http://​www.copfilter.org/​forum/​viewtopic.php?​p=776#​p776[/​url]
- 
----- 
  
 ==== Problem ==== ==== Problem ====
Line 302: Line 240:
  
 This addon only works for IPCop 1.4.x and higher</​code>​ This addon only works for IPCop 1.4.x and higher</​code>​
- 
----- 
  
 ==== Cause ==== ==== Cause ====
  
 There exists a file '/​etc/​**crontab**',​ a relic from a previous version of IPCop, which was inadvertently not deleted during the update process. There exists a file '/​etc/​**crontab**',​ a relic from a previous version of IPCop, which was inadvertently not deleted during the update process.
- 
----- 
  
 ==== Solution ==== ==== Solution ====
  
 <​code>​rm /​etc/​crontab</​code>​ <​code>​rm /​etc/​crontab</​code>​
-\\ 
  
-===== ===== +{{ :images:line.png?nolink |}}
-[[http://​www.copfilter.org/​wiki/​doku.php?​id=en:​tips_and_tricks#​dokuwiki__top|{{:images:backtotop.png}}]] +
- +
-===== ===== +
----- +
----- +
-\\+
  
 {{ :​images:​copfilter_v1_logo1.png?​nolink&​90|V1-Logo}} {{ :​images:​copfilter_v1_logo1.png?​nolink&​90|V1-Logo}}
Line 328: Line 255:
  
 A big "​Thanks!"​ goes to '​cjmatsel'​ - this tip was originally published in Copfilter section of his [[http://​www.ipcopwiki.de/​index.php/​|IPCopWiki]]! A big "​Thanks!"​ goes to '​cjmatsel'​ - this tip was originally published in Copfilter section of his [[http://​www.ipcopwiki.de/​index.php/​|IPCopWiki]]!
- 
----- 
  
 <note important>​ <note important>​
-The following method applies to IPCop **V1** (1.4.xx) **ONLY** - in **V2** (2.x), the BOT addon was integrated by default. You only have to define administrative access to the [[en:​component_updates#​screenshot|Monit Service Manager (port 446)]].+The following method applies to IPCop **V1** (1.4.xx) **ONLY** - in **V2** (2.x), the BOT addon was integrated by default. You only have to define administrative access to the [[:en:​component_updates#​screenshot|Monit Service Manager (port 446)]].
 </​note>​ </​note>​
- 
----- 
  
 ==== Description ==== ==== Description ====
Line 355: Line 278:
 |IPCopFTPActive| ​ 50400-50599 ​ |  TCP  || |IPCopFTPActive| ​ 50400-50599 ​ |  TCP  ||
 |Monit Service Manager| ​ 446  |  TCP  || |Monit Service Manager| ​ 446  |  TCP  ||
- 
  
 You can add the following useful services (if required, these are **not** part of Copfilter): You can add the following useful services (if required, these are **not** part of Copfilter):
- 
  
 |  __Standard services:​__ ​ ||| |  __Standard services:​__ ​ |||
Line 369: Line 290:
 Best is, to arrange required services in groups. Best is, to arrange required services in groups.
  
----- 
-\\ 
 Here's a screenshot of a sample configuration that still contains some other services: Here's a screenshot of a sample configuration that still contains some other services:
  
Line 383: Line 302:
 </​note>​ </​note>​
  
-===== ===== +{{ :images:line.png?nolink |}}
-[[http://​www.copfilter.org/​wiki/​doku.php?​id=en:​tips_and_tricks#​dokuwiki__top|{{:images:backtotop.png}}]] +
- +
-===== ===== +
----- +
----- +
-\\+
  
 ===== 8. Testing sendEmail ===== ===== 8. Testing sendEmail =====
Line 395: Line 308:
 ==== Problem ==== ==== Problem ====
  
-Unfortunately,​ it happens every now and then that [[en:​component_updates#​sendemail|sendEmail]] has problems with the current service provider. +Unfortunately,​ it happens every now and then that [[:en:​component_updates#​sendemail|sendEmail]] has problems with the current service provider.
- +
-----+
  
 ==== Solution ==== ==== Solution ====
Line 407: Line 318:
 <​code>​./​sendEmail -f [sender-address] -u [Subject] -t [recipient-address] -s [SMTP-serveraddress] -xu [SMTP-username] -xp [SMTP-password]</​code>​ <​code>​./​sendEmail -f [sender-address] -u [Subject] -t [recipient-address] -s [SMTP-serveraddress] -xu [SMTP-username] -xp [SMTP-password]</​code>​
 **[ENTER]**\\ **[ENTER]**\\
-\\ 
-A successful result should look like this:\\ 
  
----- +A successful result should look like this: 
-\\+
 [size=11]''​root@coprouter:/​tmp # **[...place of '​sendEmail'​-commands...]**\\ [size=11]''​root@coprouter:/​tmp # **[...place of '​sendEmail'​-commands...]**\\
 Reading message body from STDIN because the '​-m'​ option was not used.\\ Reading message body from STDIN because the '​-m'​ option was not used.\\
Line 417: Line 326:
   - First line must be received within 60 seconds.\\   - First line must be received within 60 seconds.\\
   - End manual input with a CTRL-D on its own line.\\   - End manual input with a CTRL-D on its own line.\\
-\\+
 testmail nummer 3\\ testmail nummer 3\\
 Jan 02 21:52:59 coprouter sendemail[10044]:​ Message input complete.\\ Jan 02 21:52:59 coprouter sendemail[10044]:​ Message input complete.\\
Line 423: Line 332:
 Jan 02 21:52:59 coprouter sendemail[10044]:​ Email was sent successfully!''​\\[/​size] Jan 02 21:52:59 coprouter sendemail[10044]:​ Email was sent successfully!''​\\[/​size]
  
----- 
-\\ 
 **Check all outputs for errors!** **Check all outputs for errors!**
  
-To be sure, successively press the buttons "Send test email virus",​ "Send test e-mail SPAM" and "Send a test email" in [[en:​copfilter-basics_-_features_and_first_setup#​tests_logs|Copfilter Test & Logs]].+To be sure, successively press the buttons "Send test email virus",​ "Send test e-mail SPAM" and "Send a test email" in [[:en:​copfilter-basics_-_features_and_first_setup#​tests_logs|Copfilter Test & Logs]].
  
 {{  en:​images:​copfilter_testmails.png?​nolink ​ |Testmails}} {{  en:​images:​copfilter_testmails.png?​nolink ​ |Testmails}}
  
-Wait a few seconds and then take a look at '/​var/​log/​**messages**'​ ...:\\ +Wait a few seconds and then take a look at '/​var/​log/​**messages**'​ ...:
-\\+
  
----- 
-\\ 
 [size=11]''​Jan ​ 2 21:54:25 coprouter copfilter send testvirus:​\\ [size=11]''​Jan ​ 2 21:54:25 coprouter copfilter send testvirus:​\\
 Jan  2 21:54:25 coprouter copfilter send testvirus: please wait until scripts finishes\\ Jan  2 21:54:25 coprouter copfilter send testvirus: please wait until scripts finishes\\
Line 459: Line 363:
 Jan  2 21:54:32 coprouter copfilter send exe attachment: and smtp server in the copfilter webgui\\ Jan  2 21:54:32 coprouter copfilter send exe attachment: and smtp server in the copfilter webgui\\
 Jan  2 21:54:32 coprouter copfilter send exe attachment:​\\ Jan  2 21:54:32 coprouter copfilter send exe attachment:​\\
-Jan  2 21:54:32 coprouter copfilter **send exe attachment: Jan 02 21:54:32 coprouter sendEmail[8546]:​ Email was sent successfully!**''​[/​size]\\+Jan  2 21:54:32 coprouter copfilter **send exe attachment: Jan 02 21:54:32 coprouter sendEmail[8546]:​ Email was sent successfully!**''​[/​size]
  
----- 
-\\ 
 Shortly thereafter a total of three e-mails should arrive - one with an "​EXE"​-Attachment,​ the other two - if '​p3scan'​ was activated - starting with roughly the following text body.\\ Shortly thereafter a total of three e-mails should arrive - one with an "​EXE"​-Attachment,​ the other two - if '​p3scan'​ was activated - starting with roughly the following text body.\\
  
----- 
-\\ 
 [size=11]''​-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-\\ [size=11]''​-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-\\
 \\ \\
Line 504: Line 404:
 by Jack S. Lai %%<​laitcg@cox.net>​%%''​[/​size] by Jack S. Lai %%<​laitcg@cox.net>​%%''​[/​size]
  
----- 
-\\ 
 If the current '​sendEmail'​ version is running into problems, it has to be tested: If the current '​sendEmail'​ version is running into problems, it has to be tested:
  
Line 516: Line 414:
 For testing, just copy the desired '​sendEmail'​-[version] to '​sendEmail':​ For testing, just copy the desired '​sendEmail'​-[version] to '​sendEmail':​
 <​code>​cp sendEmail-1.54 sendEmail</​code>​By overwriting the destination file you can immediately start a new testrun. <​code>​cp sendEmail-1.54 sendEmail</​code>​By overwriting the destination file you can immediately start a new testrun.
-\\ 
-\\ 
  
-===== ===== +{{ :images:line.png?nolink |}}
-[[http://​www.copfilter.org/​wiki/​doku.php?​id=en:​tips_and_tricks#​dokuwiki__top|{{:images:backtotop.png}}]] +
- +
-===== ===== +
----- +
----- +
-\\+
  
 {{ :​images:​copfilter_v2_logo1.png?​nolink&​90|V2-Logo}} {{ :​images:​copfilter_v2_logo1.png?​nolink&​90|V2-Logo}}
-===== 9. IPCop-Installation - define your own partitions (V2)=====+===== 9. IPCop-Installation - adjusting ​partitions ​manually ​(V2)=====
  
 ==== Problem ==== ==== Problem ====
Line 535: Line 425:
  
 This is enough for most installations - but not (for example) for the [[https://​www.it-connect-unix.de/​index.php?​option=com_jdownloads&​view=viewcategory&​catid=18&​Itemid=78|developer version]]. This is enough for most installations - but not (for example) for the [[https://​www.it-connect-unix.de/​index.php?​option=com_jdownloads&​view=viewcategory&​catid=18&​Itemid=78|developer version]].
- 
----- 
  
 ==== Solution ==== ==== Solution ====
Line 545: Line 433:
  
 More informations regarding '​parted'​ can be found on http://​ftp.gnu.org/​old-gnu/​Manuals/​parted-1.6.1/​html_mono/​parted.html More informations regarding '​parted'​ can be found on http://​ftp.gnu.org/​old-gnu/​Manuals/​parted-1.6.1/​html_mono/​parted.html
- 
----- 
  
 ==== Method ==== ==== Method ====
- 
-=== === 
  
 **1.** Burn IPCop-V2-ISO-Image to CD. **1.** Burn IPCop-V2-ISO-Image to CD.
  
----- 
-\\ 
 **2.** Boot from CD. **2.** Boot from CD.
  
----- 
-\\ 
 **3.** At Boot-Prompt type:\\ **3.** At Boot-Prompt type:\\
 <​code>​install parted</​code>​**[ENTER]** <​code>​install parted</​code>​**[ENTER]**
  
----- 
-\\ 
 **4.** After the hardware initialization and the media selection you'll see a message box: **4.** After the hardware initialization and the media selection you'll see a message box:
 <style float-left box background>​ <style float-left box background>​
 Do your thing with parted now! Do your thing with parted now!
 </​style>​ </​style>​
 +
 +[color=red][**Don'​t press ENTER now!**][/​color]
 \\ \\
 \\ \\
 \\ \\
-\\ 
-[color=red][**Don'​t press ENTER now!**][/​color] 
- 
----- 
 \\ \\
 **5.** Press **[ALT-F5]** or **[ALT-F6]** **5.** Press **[ALT-F5]** or **[ALT-F6]**
  
----- +**6.** On the console type:
-\\ +
-**6.** On the console type:\\+
 <​code>​cat /​proc/​partitions</​code>​ <​code>​cat /​proc/​partitions</​code>​
 **[ENTER]** **[ENTER]**
Line 589: Line 463:
 {{:​images:​v2_install_cat_proc_partitions.png?​nolink|cat /​proc/​partitions}} {{:​images:​v2_install_cat_proc_partitions.png?​nolink|cat /​proc/​partitions}}
  
----- 
-\\ 
 **7.** Now type (depending on hard disk type):\\ **7.** Now type (depending on hard disk type):\\
 <​code>​parted /​dev/​hda</​code>​ <​code>​parted /​dev/​hda</​code>​
 (or **/​dev/​sda**,​ see above)\\ (or **/​dev/​sda**,​ see above)\\
-**[ENTER]**\\+**[ENTER]**
  
 '​Parted'​ is started and you are now on the '​parted'​ command line: '​Parted'​ is started and you are now on the '​parted'​ command line:
Line 600: Line 472:
 {{:​images:​v2_install_parted_dev_sda.png?​nolink&​|parted /dev/sda}} {{:​images:​v2_install_parted_dev_sda.png?​nolink&​|parted /dev/sda}}
  
----- +**8.** Type **print** to display the partition table.
-\\ +
-**8.** Type **print** to display the partition table.\\+
 <​code>​print</​code>​ <​code>​print</​code>​
 **[ENTER]** **[ENTER]**
Line 608: Line 478:
 {{:​images:​v2_install_parted_print.png?​nolink&​|print}} {{:​images:​v2_install_parted_print.png?​nolink&​|print}}
  
----- +**9.** If necessary, remove existing partitions by typing **rm [Number]**. **[Number]** corresponds to the partition numbering of the "​Number"​ column.
-\\ +
-**9.** If necessary, remove existing partitions by typing **rm [Number]**. **[Number]** corresponds to the partition numbering of the "​Number"​ column.\\+
  
----- 
-\\ 
 **10.** If you get an error message like "​unrecognized disk label",​ type **mklabel msdos** to create a msdos-Disklabel:​\\ **10.** If you get an error message like "​unrecognized disk label",​ type **mklabel msdos** to create a msdos-Disklabel:​\\
 <​code>​mklabel msdos</​code>​ <​code>​mklabel msdos</​code>​
 **[ENTER]** **[ENTER]**
  
----- 
-\\ 
 **11.** The following command creates a **root**-Partition with **8** GB.\\ **11.** The following command creates a **root**-Partition with **8** GB.\\
-Ignore **//​Warning:​ The resulting partition is not properly aligned for best performance. Ignore/​Cancel?//​**).\\ +<​code>​mkpart primary ext2 2048s 8191</​code>​
-<​code>​mkpart primary ext2 64k 8192</​code>​+
 **[ENTER]** **[ENTER]**
  
----- +**12.** Next, a second partition must be created for **var** - the following command uses the entire remaining disk space: 
-\\ +<​code>​mkpart primary ext2 8192 100%</​code>​
-**12.** Next, a second partition must be created for **var** - the following command uses the entire remaining disk space:\\ +
-<​code>​mkpart primary ext2 8193 100%</​code>​+
 **[ENTER]** **[ENTER]**
  
----- +**13.** Make **root**-partition bootable:
-\\ +
-**13.** Make **root**-partition bootable:\\+
 <​code>​set 1 boot on</​code>​ <​code>​set 1 boot on</​code>​
 **[ENTER]** **[ENTER]**
  
----- +**14.** Leave '​parted':​
-\\ +
-**14.** Leave '​parted':​\\+
 <​code>​quit</​code>​ <​code>​quit</​code>​
 **[ENTER]** **[ENTER]**
  
----- +**15.** Type **sync** to write pending changes immediately to disk (important for SCSI-Systems!):​
-\\ +
-**15.** Type **sync** to write pending changes immediately to disk (important for SCSI-Systems!):​\\+
 <​code>​sync</​code>​ <​code>​sync</​code>​
 **[ENTER]** **[ENTER]**
  
----- +**16.** List new partitions:
-\\ +
-**16.** List new partitions:\\+
 <​code>​parted -l</​code>​ <​code>​parted -l</​code>​
 **[ENTER]** **[ENTER]**
  
----- 
-\\ 
 **17.** Press **[ALT-F1]** to return to the first shell (above, item 4.). **17.** Press **[ALT-F1]** to return to the first shell (above, item 4.).
  
----- 
-\\ 
 **18.** Press **[ENTER]** to continue with IPCop-V2-Installation. **18.** Press **[ENTER]** to continue with IPCop-V2-Installation.
- 
-===== ===== 
-\\ 
- 
----- 
  
 ==== Download Addon-friendly ==== ==== Download Addon-friendly ====
  
-If you're not familiar with this procedure, you can download an **Addon-friendly**-IPCop-V2-Version which **automatically** creates a bigger root partition from this URL:\\+If you're not familiar with this procedure, you can download an **Addon-friendly**-IPCop-V2-Version which **automatically** creates a bigger root partition from this URL:
  
 **Download:​**\\ **Download:​**\\
Line 676: Line 520:
  
 Such an installation requires at least a **10 GB** hard disk - a **5 GB** root partition and a **256 MB** swapfile is created. Such an installation requires at least a **10 GB** hard disk - a **5 GB** root partition and a **256 MB** swapfile is created.
- 
----- 
  
 ==== Note ==== ==== Note ====
Line 683: Line 525:
 <​note>​**The ISO files, which are available at the above URL for downloading are __no official IPCop versions__!**</​note>​ <​note>​**The ISO files, which are available at the above URL for downloading are __no official IPCop versions__!**</​note>​
  
-===== ===== +{{ :images:line.png?nolink |}}
-[[http://​www.copfilter.org/​wiki/​doku.php?​id=en:​tips_and_tricks#​dokuwiki__top|{{:images:backtotop.png}}]] +
- +
-===== ===== +
----- +
----- +
-\\+
  
 {{ :​images:​copfilter_v1_logo1.png?​nolink&​90|V1-Logo}} {{ :​images:​copfilter_v1_logo1.png?​nolink&​90|V1-Logo}}
Line 702: Line 538:
 In this tutorial the ramdisk is created with a size of 64MB, which has so far proved to be sufficient for standard use - higher values are possible, but go at the expense of available memory. In this tutorial the ramdisk is created with a size of 64MB, which has so far proved to be sufficient for standard use - higher values are possible, but go at the expense of available memory.
  
----- +[color=red]**Please note:​**[/​color]
-\\ +
-[color=red]**Please note:​**[/​color]\\+
  
   * The Ramdisk must **in any case** be able to manage the temporary files of many **__simultaneous__** downloads.   * The Ramdisk must **in any case** be able to manage the temporary files of many **__simultaneous__** downloads.
   * With a value of eg MAXSCANSIZE 30720000 (30MB), a 64MB ramdisk may be **__fully utilized__** with the **__simultaneous__** downloads of **__two__** large files - this can cause problems.   * With a value of eg MAXSCANSIZE 30720000 (30MB), a 64MB ramdisk may be **__fully utilized__** with the **__simultaneous__** downloads of **__two__** large files - this can cause problems.
   * In this case, a bigger ramdisk must be created or the value of MAXSCANSIZE has to be reduced!   * In this case, a bigger ramdisk must be created or the value of MAXSCANSIZE has to be reduced!
- 
----- 
  
 <note important>​ <note important>​
Line 717: Line 549:
   * [color=red]**After changing this option, a reboot of the IPCop computer is mandatory.**[/​color]   * [color=red]**After changing this option, a reboot of the IPCop computer is mandatory.**[/​color]
 </​note>​ </​note>​
- 
----- 
  
 ==== Environment ==== ==== Environment ====
  
-This optimization was performed on a IPCop 1.4.21, using current [[en:​component_updates#​havp|HAVP]] and [[en:​clamav-update|ClamAV]]-versions. HAVP-parameter were as follows (Copfilter **0.84beta4**,​ ClamAV running in library-mode):​+This optimization was performed on a IPCop 1.4.21, using current [[:en:​component_updates#​havp|HAVP]] and [[:en:​clamav-update|ClamAV]]-versions. HAVP-parameter were as follows (Copfilter **0.84beta4**,​ ClamAV running in library-mode):​
  
 ^Option^Value^Unit^ ^Option^Value^Unit^
Line 737: Line 567:
 |CLAMMAXFILESIZE| ​ 25  |MB| |CLAMMAXFILESIZE| ​ 25  |MB|
 |CLAMMAXRECURSION| ​ 16  |Number| |CLAMMAXRECURSION| ​ 16  |Number|
- 
----- 
 \\ \\
-[size=15]**[color=red]Please note:​[/​color]**[/​size]\\ 
  
-[size=15][color=red]**__IPCop 1.4.x ONLY!__**[/​color][/​size] {{ :​images:​copfilter_v1_logo1.png?​nolink&​90|V1-Logo}}\\+<WRAP center round important 95%> 
 +[size=15]**[color=red]Please note:​[/​color]**[/​size] 
 + 
 +[size=15][color=red]**__IPCop 1.4.x ONLY!__**[/​color][/​size] {{ :​images:​copfilter_v1_logo1.png?​nolink&​90|V1-Logo}}
  
   * In IPCop-versions 1.9.x/2.x [color=red]**(V2)**[/​color],​ kernel modul for Ramdisk has been removed.\\   * In IPCop-versions 1.9.x/2.x [color=red]**(V2)**[/​color],​ kernel modul for Ramdisk has been removed.\\
-  * [url=de:​grund-installation#​download]Copfilter-Version 2.0.x (IPCop 1.9.x/​2.x)[/​url] therefore uses [[http://​de.wikipedia.org/​wiki/​Tmpfs|TMPFS]] - this option can be switched ON/OFF using //**Enable HAVP Scanner to run in Memory**// via HAVP-GUI:\\+  * [url=de:​grund-installation#​download]Copfilter-Version 2.0.x (IPCop 1.9.x/​2.x)[/​url] therefore uses [[http://​de.wikipedia.org/​wiki/​Tmpfs|TMPFS]] - this option can be switched ON/OFF using //Enable HAVP Scanner to run in Memory// via HAVP-GUI:
  
-{{en:​images:​v2_havp_tmps_switch.png?​nolink&​|TMPFS-Switch}} +{{  en:​images:​v2_havp_tmps_switch.png?​nolink& ​ |TMPFS-Switch}} 
- +</​WRAP>​ 
-----+\\
  
 ==== Method ==== ==== Method ====
Line 759: Line 589:
   * /​var/​log/​copfilter/​default/​opt/​havp/​etc/​init.d/​**copfilter_havp**   * /​var/​log/​copfilter/​default/​opt/​havp/​etc/​init.d/​**copfilter_havp**
  
----- 
-\\ 
 __**1. Edit '​grub.conf':​**__ __**1. Edit '​grub.conf':​**__
  
Line 768: Line 596:
 <​code>​kernel /vmlinuz root=/​dev/​sda4 panic=10 init=/​linuxrc rw ramdisk_size=64000</​code>​ <​code>​kernel /vmlinuz root=/​dev/​sda4 panic=10 init=/​linuxrc rw ramdisk_size=64000</​code>​
  
----- 
-\\ 
 __**2. Edit '​global_settings':​**__ __**2. Edit '​global_settings':​**__
  
 Insert line **HAVP_RAMDISK=on** in file '/​var/​log/​copfilter/​default/​etc/​**global_settings**. Insert line **HAVP_RAMDISK=on** in file '/​var/​log/​copfilter/​default/​etc/​**global_settings**.
-(Important: '​**on**'​ resp. '​**off**'​ must be **lower case**!) 
  
----- +<note important>​This is case-sensitive, '​**on**'​ resp. '​**off**'​ must be **lower case**!</​note>​ 
-\\+
 __**3. Edit '​copfilter_havp':​**__ __**3. Edit '​copfilter_havp':​**__
  
Line 806: Line 631:
         fi</​code>​         fi</​code>​
  
----- 
-\\ 
 [size=15][color=red]**Attention:​**[/​color][/​size] [size=15][color=red]**Attention:​**[/​color][/​size]
  
Line 815: Line 638:
 <​code>​chown -R havp.copfilter /​var/​log/​copfilter/​default/​opt/​havp/​tmp</​code>​ <​code>​chown -R havp.copfilter /​var/​log/​copfilter/​default/​opt/​havp/​tmp</​code>​
  
----- 
-\\ 
 __**4. Edit '​copfilter_havp':​**__ __**4. Edit '​copfilter_havp':​**__
  
Line 854: Line 675:
 <note important>​[color=red]**Afterwards,​ IPCop-PC must be __restarted__ for the changes to take effect.**[/​color]</​note>​ <note important>​[color=red]**Afterwards,​ IPCop-PC must be __restarted__ for the changes to take effect.**[/​color]</​note>​
  
----- 
-\\ 
 __**Note:​**__ __**Note:​**__
  
Line 864: Line 683:
 {{  :​images:​havp_ram_disk.png?​nolink& ​ |IPCop HDD- and Inodes}} {{  :​images:​havp_ram_disk.png?​nolink& ​ |IPCop HDD- and Inodes}}
  
----- 
-\\ 
 __**Verification through the log files:**__ __**Verification through the log files:**__
   * In **/​var/​log/​messages** Ramdisk initializing can be seen:   * In **/​var/​log/​messages** Ramdisk initializing can be seen:
 <​code>​coprouter kernel: RAMDISK driver initialized:​ 16 RAM disks of 5120K size 1024 blocksize</​code>​ <​code>​coprouter kernel: RAMDISK driver initialized:​ 16 RAM disks of 5120K size 1024 blocksize</​code>​
  
----- 
-\\ 
 __**Check filesystem:​**__ __**Check filesystem:​**__
   * Under **/​var/​log/​copfilter/​default/​opt/​havp/​tmp** there'​s a new directory: **lost+found**   * Under **/​var/​log/​copfilter/​default/​opt/​havp/​tmp** there'​s a new directory: **lost+found**
- 
----- 
  
 ==== Specials ==== ==== Specials ====
Line 882: Line 695:
  
 {{  :​images:​v1_havp_ramdisk_neustart.png?​nolink& ​ |HAVP Restart}} {{  :​images:​v1_havp_ramdisk_neustart.png?​nolink& ​ |HAVP Restart}}
-\\ 
  
-===== ===== +{{ :images:line.png?nolink |}}
-[[http://​www.copfilter.org/​wiki/​doku.php?​id=en:​tips_and_tricks#​dokuwiki__top|{{:images:backtotop.png}}]] +
- +
-===== ===== +
----- +
----- +
-\\+
  
 {{ :​images:​copfilter_v2_logo1.png?​nolink&​90|V2-Logo}} {{ :​images:​copfilter_v2_logo1.png?​nolink&​90|V2-Logo}}
Line 896: Line 702:
  
 **Initiated by:** [url]http://​www.copfilter.org/​forum/​viewtopic.php?​p=3372#​p3372[/​url] (german) **Initiated by:** [url]http://​www.copfilter.org/​forum/​viewtopic.php?​p=3372#​p3372[/​url] (german)
- 
----- 
  
 ==== Problem ==== ==== Problem ====
Line 904: Line 708:
   * SpamAssassin and Razor-, DCC- and DNSBL-lists are enabled.   * SpamAssassin and Razor-, DCC- and DNSBL-lists are enabled.
   * In addition, the mails are checked with ClamAV.   * In addition, the mails are checked with ClamAV.
- 
----- 
  
 ==== Cause ==== ==== Cause ====
Line 928: Line 730:
  
 So, under certain circumstances,​ scanning can take more than 90 seconds (or more) per mail! So, under certain circumstances,​ scanning can take more than 90 seconds (or more) per mail!
- 
----- 
  
 ==== Solution ==== ==== Solution ====
Line 937: Line 737:
 {{:​en:​images:​traffic_accounting.png?​nolink&​|Traffic Accounting}} {{:​en:​images:​traffic_accounting.png?​nolink&​|Traffic Accounting}}
  
-2. With the following patch for Copfilter version **2.0.90** and **2.0.91beta1** RBL checks can be disabled in [[en:​copfilter-basics_-_features_and_first_setup#​antispam|Antispam GUI]] when Razor, DCC and DNSBL are enabled:+2. With the following patch for Copfilter version **2.0.90** and **2.0.91beta1** RBL checks can be disabled in [[:en:​copfilter-basics_-_features_and_first_setup#​antispam|Antispam GUI]] when Razor, DCC and DNSBL are enabled:
  
 {{:​en:​images:​copfilter_antispam-patch_-_rbl_check.png?​nolink&​|AntiSpam-Patch}} {{:​en:​images:​copfilter_antispam-patch_-_rbl_check.png?​nolink&​|AntiSpam-Patch}}
- 
----- 
  
 ==== Download ==== ==== Download ====
Line 952: Line 750:
 |[color=red]**V2:​**[/​color]|[[http://​www.copfilter.org/​v2-downloads/​general/​cp-spamd_v2-2.0.91beta-speedup.tgz|cp-spamd_v2-2.0.91beta-speedup.tgz]]| ​ 2 KB  | |[color=red]**V2:​**[/​color]|[[http://​www.copfilter.org/​v2-downloads/​general/​cp-spamd_v2-2.0.91beta-speedup.tgz|cp-spamd_v2-2.0.91beta-speedup.tgz]]| ​ 2 KB  |
 |**MD5SUM:​**| ​ F0D3E48EF0E1B2137626C699602EB4E8 ​ || |**MD5SUM:​**| ​ F0D3E48EF0E1B2137626C699602EB4E8 ​ ||
- 
----- 
  
 ==== Installation ==== ==== Installation ====
  
-**Installation proceeds as described in [[en:​copfilter_-_installation_and_update#​the_installation_of_the_software_archives|The installation of the software archives]]:​**\\ +**Installation proceeds as described in [[:en:​copfilter_-_installation_and_update#​the_installation_of_the_software_archives|The installation of the software archives]]:​**\\ 
-  - [[en:​copfilter_-_installation_and_update#​login|Login]] +  - [[:en:​copfilter_-_installation_and_update#​login|Login]] 
-  - [[en:​copfilter_-_installation_and_update#​download|Download]] +  - [[:en:​copfilter_-_installation_and_update#​download|Download]] 
-  - [[en:​copfilter_-_installation_and_update#​check_md5_sum|Check MD5 sum]] +  - [[:en:​copfilter_-_installation_and_update#​check_md5_sum|Check MD5 sum]] 
-  - [[en:​copfilter_-_installation_and_update#​extract_the_installation_archive|Extract the installation archive]] +  - [[:en:​copfilter_-_installation_and_update#​extract_the_installation_archive|Extract the installation archive]] 
-  - [[en:​copfilter_-_installation_and_update#​change_to_installation_directory|Change to installation directory]] +  - [[:en:​copfilter_-_installation_and_update#​change_to_installation_directory|Change to installation directory]] 
-  - [[en:​copfilter_-_installation_and_update#​starting_the_installation|Starting the installation]] +  - [[:en:​copfilter_-_installation_and_update#​starting_the_installation|Starting the installation]] 
-  - [[en:​copfilter_-_installation_and_update#​installation_ok|Installation ok?]] +  - [[:en:​copfilter_-_installation_and_update#​installation_ok|Installation ok?]] 
-  - [[en:​copfilter_-_installation_and_update#​deleting_the_installation_directories_optional|Deleting the installation directories (optional)]] +  - [[:en:​copfilter_-_installation_and_update#​deleting_the_installation_directories_optional|Deleting the installation directories (optional)]]
-\\+
  
-===== ===== +{{ :images:line.png?nolink |}}
-[[http://​www.copfilter.org/​wiki/​doku.php?​id=en:​tips_and_tricks#​dokuwiki__top|{{:images:backtotop.png}}]] +
- +
-===== ===== +
----- +
----- +
-\\+
  
 ===== 12. HAVP - Authentification-Problem ===== ===== 12. HAVP - Authentification-Problem =====
  
 Italic quotes are from the original posting - it's unfortunately no longer available. Italic quotes are from the original posting - it's unfortunately no longer available.
- 
----- 
  
 ==== Problem ==== ==== Problem ====
Line 1000: Line 787:
 Your **workaround with Squid** is the correct way - also you can add such sites\\ Your **workaround with Squid** is the correct way - also you can add such sites\\
 as no-proxy in browser.//​\\ as no-proxy in browser.//​\\
- 
----- 
  
 ==== Solution ==== ==== Solution ====
  
-Log in on the console as '​root'​ using a suitable client (ssh, [[en:​tools#​putty|PuTTY]],​ ...) and initiate the following commands:\\+Log in on the console as '​root'​ using a suitable client (ssh, [[:en:​tools#​putty|PuTTY]],​ ...) and initiate the following commands:\\
 (The code paragraphs contain __always a single command line__, the bold formatted words in angular clips in between are standing for the corresponding __keystrokes__.)\\ (The code paragraphs contain __always a single command line__, the bold formatted words in angular clips in between are standing for the corresponding __keystrokes__.)\\
 [code]cd /tmp [/​code]**[ENTER]** [code]cd /tmp [/​code]**[ENTER]**
Line 1013: Line 798:
 [code]cp copfilter_havp copfilter_havp_backup[/​code] [code]cp copfilter_havp copfilter_havp_backup[/​code]
  
-//**Open file for editing:​**//​\\+//**Open file for editing:​**//​
 [code]nano copfilter_havp[/​code] [code]nano copfilter_havp[/​code]
  
-//**Or:**//\\+//**Or:**//
 [code]vi copfilter_havp[/​code] [code]vi copfilter_havp[/​code]
  
-//​**Replace:​**//​\\+//​**Replace:​**//​
 <​code>#​ COPFILTER START - havp - do not modify <​code>#​ COPFILTER START - havp - do not modify
 acl copfilter_all src 0.0.0.0/​0.0.0.0 acl copfilter_all src 0.0.0.0/​0.0.0.0
Line 1032: Line 817:
 # COPFILTER END - havp - do not modify</​code>​ # COPFILTER END - havp - do not modify</​code>​
  
-//​**With:​**//​\\+//​**With:​**//​
 <code - copfilter_havp_acl>#​ COPFILTER START - havp - do not modify <code - copfilter_havp_acl>#​ COPFILTER START - havp - do not modify
 acl copfilter_all src 0.0.0.0/​0.0.0.0 acl copfilter_all src 0.0.0.0/​0.0.0.0
Line 1048: Line 833:
 # COPFILTER END - havp - do not modify</​code>​ # COPFILTER END - havp - do not modify</​code>​
  
-//**These two lines are important:​**//​\\+//**These two lines are important:​**//​
 <​code>​acl NOSCAN dstdomain www.websitehere.de <​code>​acl NOSCAN dstdomain www.websitehere.de
 always_direct allow NOSCAN</​code>​ always_direct allow NOSCAN</​code>​
  
 //​**...don'​t forget to save!**\\ //​**...don'​t forget to save!**\\
-Thus, this setting is stored permanently on IPCop and Copfilter can still change the settings through the GUI, without overwriting these entries.\\ +Thus, this setting is stored permanently on IPCop and Copfilter can still change the settings through the GUI, without overwriting these entries. 
-\\ + 
-**Next, restart HAVP via console:​**//​\\+**Next, restart HAVP via console:​**//​
 [code]/​usr/​local/​bin/​copfilter_restarthavp[/​code] [code]/​usr/​local/​bin/​copfilter_restarthavp[/​code]
  
-//**Or restart HAVP via GUI.**//\\+//**Or restart HAVP via GUI.**//
  
-//If you wish to exclude other sites of HAVP, separated by a space, eg://\\+//If you wish to exclude other sites of HAVP, separated by a space, eg://
 [code]acl NOSCAN dstdomain www.websitehere.de anotherwebseite.com[/​code] [code]acl NOSCAN dstdomain www.websitehere.de anotherwebseite.com[/​code]
- 
----- 
  
 <​note>​ <​note>​
-[size=15]**[color=red]Please note:​[/​color]**[/​size]\\+[size=15]**[color=red]Please note:​[/​color]**[/​size]
  
   * [color=red]This somewhat complicated procedure about editing '​copfilter_havp'​ is necessary so that these changes are not overwritten when Copfilter or Squid restart - upon restarting HAVP they will be placed in '/​var/​ipcop/​proxy/​**squid.conf**'​.[/​color]   * [color=red]This somewhat complicated procedure about editing '​copfilter_havp'​ is necessary so that these changes are not overwritten when Copfilter or Squid restart - upon restarting HAVP they will be placed in '/​var/​ipcop/​proxy/​**squid.conf**'​.[/​color]
 </​note>​ </​note>​
- 
----- 
  
 === Note === === Note ===
Line 1093: Line 874:
 http_access deny ipacl</​code>​ http_access deny ipacl</​code>​
 \\ \\
-An overview of the Squid access list options can be found here: [url]http://​wiki.squid-cache.org/​SquidFaq/​SquidAcl[/​url] +An overview of the Squid access list options can be found here:\\ 
-\\ +[url]http://​wiki.squid-cache.org/​SquidFaq/​SquidAcl[/​url]
-\\+
  
-====== ====== +{{ :​images:​line.png?​nolink |}}
----- +
-----+
  
 <style background-lwhite center> <style background-lwhite center>
-<style background-lwhite float-left>​<sup>[[:​en:​bugfixes|Bugfixes]]</sup></​style>​ +<style background-lwhite float-left>​[size=11][[:​en:​bugfixes|Bugfixes]][/size]</​style>​ 
-<style background-lwhite float-right>​<sup>[[:​en:​howtos|HowTos]]</sup></​style>​ +<style background-lwhite float-right>​[size=11][[:​en:​howtos|HowTos]][/size]</​style>​ 
-<style background-lwhite>​<sup>[[:​en:​sitemap#​sitemap|Sitemap]]</sup></​style>​+<style background-lwhite>​[size=11][[:​en:​sitemap#​sitemap|Sitemap]][/size]</​style>​
 </​style>​ </​style>​
en/tips_and_tricks.1380653568.txt.gz · Last modified: 2013/10/01 20:52 by fischerm